...
The Horus R/C controller provides power to the TXMOD module and R/C control data to be transmitted to the aircraft. The controller is capable of displaying aircraft telemetry directly on the built-in screen.
Instructions to Connect
Note |
---|
The instructions below are specific instructions designed to expand on actions in the aircraft checklist. This information is supplemental and is not to be used as a guide for operations. Please follow the aircraft checklist for procedures and instructions for when to power on the aircraft. |
Connect to TXMOD Access Point
...
How to connect with Ground control software
Mission Planner
Windows
In the top right corner select the drop down menu and pick UDP
Enter 14550 for the local port and click ok
Wait for the parameters to download
You are now connected
QGroundcontrol
Windows
Select the Purple icon in the top left of the screen to go to settings
Select Comm Links in the sidebar
Click Add at the bottom of the screen
Enter a name for the Vehicle
Choose type UDP
Enter 14550 for the listening port
Leave target hosts blank
Click Ok
Select the new link in the menu
Click connect
Android or iOS
Select the Purple icon in the top left of the screen to go to settings
Select Comm Links in the sidebar
Click Add at the bottom of the screen
Enter a name for the Vehicle
Choose type UDP
Enter 14550 for the listening port
Leave target hosts blank
Click Ok
Select the new link in the menu
Click connect
...
Connect to the TXMOD Access Point over WiFi
Open a browser
Navigate to 192.168.4.1
You will see the following page
Go to “General Settings” to change Wifi settings
Go to “RFD900x Radio Settings” to see and change settings for the aircraft radio units
...