...
Power on the Horus controller using the red power button on the face
Press and hold the button for three seconds to power on
If there are switch warnings, please place the switches into the desired positions before proceeding
Note: A warning may appear to alert the user that telemetry alarms have been disabled. This is part of the current TXMOD configuration and can be safely ignored. Future updates will alleviate this error.
Power on the aircraft *when safety procedures allow*
Use you ground station computer or tablet to connect to the WiFi hotspot generated by the TXMOD unit
SSID is the aircraft designation
This may be changed at anytimein the TXMOD settings
Default Password: 1BigDroneRadio
...
How to connect with Ground control software
Mission Planner
Windows
In the top right corner select the drop down menu and pick UDP
Enter 14550 for the local port and click ok
Wait for the parameters to download
You are now connected
QGroundcontrol
Windows
Select the Purple icon in the top left of the screen to go to settings
Select Comm Links in the sidebar
Click Add at the bottom of the screen
Enter a name for the Vehicle
Choose type UDP
Enter 14550 for the listening port
Leave target hosts blank
Click Ok
Select the new link in the menu
Click connect
Android or iOS
Select the Purple icon in the top left of the screen to go to settings
Select Comm Links in the sidebar
Click Add at the bottom of the screen
Enter a name for the Vehicle
Choose type UDP
Enter 14550 for the listening port
Leave target hosts blank
Click Ok
Select the new link in the menu
Click connect
...