...

With the hardware safety lockout disengaged the aircraft is now ready to be armed for flight. Arming the copter can be accomplished by deflecting the left control stick down and to the right for approximately one second. The aircraft will then perform a series of internal checks and signal the successful arming of the flight controller with a long tone. When the vehicle is armed the motors will idle at low speed. Be sure the area is clear before arming the flight controller.

Landing and Disarming

To land the aircraft and disarm, lower the throttle stick to start a descent. Control the decent rate with he throttle stick until touchdown. After touchdown, lower the throttle stick to the lowest level and hold it there. The aircraft will detect the landing and (software) disarm the aircraft.