...
Be careful making changes to the radio module as incorrect settings will cause the link to disconnect. Once disconnected the ground radio can no longer change settings on the air radio. See RFDesign User Guides for more detail
Troubleshooting
| Note |
|---|
The current reading displayed on the Horus is not accurate, we are currently working on a fix for this issue. |
Connection to WiFi Access Point established, but can not connect with a ground control software
Close and reopen Mission Planner or QGround Control.
Close Mission Planner/QGround Control. Reboot Horus Radio and aircraft and then reopen software.
Make sure computer firewalls are set to allow Mission Planner or QGroundControl Communication over the WiFi network.