...
| Info |
|---|
Change the IP address (10.x.y.20) in the above command to the IP address of the video encoder. This can be found on the Customer Info Sheet supplied with the aircraft. It may also be inferred from the BFD UAS IP Address Ranges standard |
Click “Apply”
Rename the shortcut on the desktop to indicate that it is a link to automatically connect to the video stream of a particular aircraft
Connecting to the Encoder with QGroundControl
Launch QGroundControl
Click the icon in the top right of the window
Select Application Settings
Go to General
Under Video settings Source select RTSP Video Stream from the drop down
Enter the URL listed below
Code Block rtsp://10.x.y.20/z3-1.sdpChange the IP address to the address for your camera
Check the box for Low Latency Mode
Click Back in the Top right corner of the window to view the main screen
The video will automatically connect and be available in the corner of the window
Click on the video to make it bigger
How to Access Encoder Settings
...
The video encoder settings are available on a webpage hosted in the encoder.
...