Introduction
The Crossfire system is capable of operating in the 868 MHz and 915 MHz bands. Depending on where in the world you are located, you may only one or other other band. This documents describes how to change bands when you have move from one region to another.
Unlock Change Bands
Power up the Crossfire TX and RX
Wait for the main screen
Enter the “Konami Code” with two enter presses replacing the original end butting presses
up, up, down, down, left, right, left, right, enter, enter
Hold down the enter button to access the menu
Navigate to XF Transmitter > Radio Settings > Region
Select Open to unlock the Crossfire band selection
Make sure to power on the Transmitter and the aircraft before you change bands. If you change bands without both sides powered on, you will have to re-bind the systems
Change Bands
Power up the Crossfire TX and RX
Wait for the main screen
Hold down the enter button to access the menu
Navigate to XF Transmitter > Radio Settings > Frequency
Select the desired band
Do not use the “Race” versions of the bands
Regions
Region | Frequency Band |
|---|---|
ITU Region 1 (Yellow) | 868 MHz SRD Band |
ITU Region 2 (Blue) | 915 MHz ISM Band |
ITU Region 3 (Purple) | 915 MHz ISM Band |